바이오가스측정기, 매립지가스측정기,Bio Gas monitor, landfill Gas Monitor

▶ 바이오가스측정기/ 매립지가스측정기/NDIR 가스분석기 (CMS-7)

판매처 : 켐익코퍼레이션 www.kemik.co.kr Tel.031-737-2121 Fax.031-737-2120

 

▶ 특징

• NDIR-Sensor: CO, CO2, CH4, N2O
• Electrochemical-Sensor: O2, NO 외 최대 9개 센서 장착 가능
• 8-Channel Voltage/Current Output
• RS-232C 통신에 의한 실시간 디스플레이
• Software 기본구성
• 256MB Data 저장
• 고성능 Peltier Cooler 사용
• 대기온도 및 대기압 기본 측정
• Heating Probe, Filter 사용으로 수분 간섭 제거

▶ 용도

• Biogas plants
• Landfills
• Greenhouses
• Incinerators
• Stationary control of combustion systems
• Continous Emmision Monitoring System

▶ 사양

Operating data
Parameter	Description
Size	W x L x H: 600 x 635 x 516 mm
Weight without probe	48 kg
Display size	Graphic LCD with backlighting. Contrast set by user, 320 x 240 pixels
Data logger	MMC 256 MB
Interface	RS232C
Supply	Mains 230 VAC 50 ? 60Hz
Gas pump	Membrane pump, set to 90 l/h
condensate pump	peristaltic pump, electronically controlled
Probe length	300 mm (other lengths available)
Sample hose	Heated hose, 3 m
Gas filter	Heated filter 20 ?
Analogue outputs / Voltage	8 channels: 0...10 V
Analogue outputs / Current	8 channels: 0/4...20 mA
Operating temperature	10? ?40?
Storage temperature	-20 ? ?+55 ?
Humidity	5 - 90 %, non-condensing

Only NDIR sensors
Parameter	Description
Measuring method	NDIR light absorption, 1 channel with light modulation
Averaging time	2 ?60 s freely programmable
Calibration	10 point calibration, stored in EEPROM
Recalibration	not necessary

Only electrochemical sensors
Parameter	Description only for electrochemical sensors
Measuring method	electrochemical
Averaging time	2?0 s freely programmable
Calibration	2 point calibration, variable
Recalibration	At least every 12 months

Technical data
Component	Method	Range	Resolution	Detection Level	Accuracy
NDIR sensors
CO - Carbon monoxide-Volume concentration CO2 - Carbon dioxide-Volume concentration CH4 - Methane-Volume concentration	IR Sensor	0...100 %	0.10 %	0.10 %	+/- 3 % rel., or 0.5 % abs.
		0....50 %	0.10 %	0.10 %	+/- 3 % rel., or 0.3 % abs.
		0...25 %	0.01 % (100 ppm)	0.01 % (100 ppm)	+/- 3 % rel., or 0.15 % abs.
		0...1 0%	0.01 % (100 ppm)	0.01 % (100 ppm)	+/- 3 % rel., or 0.05 % abs.
		0...5 %	0.01 % (100 ppm)	0.01 % (100ppm)	+/- 3 % rel., or 0.03 % abs.
		0...2.5 %	0.001 % (10 ppm)	0.001 % (10 ppm)	+/- 3 % rel., or 0.015 % abs.
N2O - Nitrous oxide -Volume concentration		0...500 ppm	1 ppm	1 ppm	+/- 3 % rel., or 5 ppm abs.
Electrochemical sensors
CO - Carbon monoxide, Volume concentration	Electrochemical sensors	0...20000 ppm	1 ppm	1 ppm	+/- 5 % of measured value, at least 5 ppm abs.
NO / NOx - Nitric oxide, Volume concentration		0...5000 ppm	1 ppm	1 ppm
NO2 - Nitrogen dioxide, Volume concentration		0...1000 ppm	1 ppm	1 ppm
SO2 - Sulphur dioxide, Volume concentration		0...5000 ppm	1 ppm	1 ppm
H2S - Hydrogen sulphide, Volume concentration		0...1000 ppm	1 ppm	1 ppm
H2 - Hydrogen, Volume concentration		0...2000 ppm	1 ppm	1 ppm
Partial pressure sensor
O2 - Oxygen, Volume concentration	partial pressure sensor	0...25 %	0.01 %	0.01 %	+/- 5 % rel., or 0.2 % abs.
Measured temperatures
Tgas ? Temperature of the flue gases	Thermocouple	-20..2000?	1?	1?	+/- 1.5 % rel., or ?2 ?
Tamb ? Ambient temperature	Thermistor	-20..100?	0.1?	0.1?	?1 ?
Further values
Atmospheric pressure	DMS bridge	800...1200 hPa	1 hPa	1 hPa	?10 hPa
Pressure/draught	DMS bridge	-25...0...+25 hPa	0.1 or 1 Pa as set	0.1 or 1 Pa as set	+/- 5 % rel., or 2 Pa
Diff. pressure	DMS bridge	-20...0...+20 hPa	0.1 or 1Pa as set	0.1 or 1Pa as set	+/- 5 % rel., or 2 Pa
V ?Flow velocity	Pitot tube	1...30 m/s	0.1 m/s	0.1 m/s	+/- 2 % rel., or 0.5 m/s
Calculated combustion parameters
TI (CO/CO2-Toxic Index)	Calculated	0...1 %	0.01 %	0.01 %	0.01 %
Lambda ? Excess air	Calculated	1..10	0.01	0.01	0.01
qA ? Combustion loss	Calculated	0..100 %	0.1 %	0.1 %	0.1 %
Eta -Efficiency	Calculated	0..100 %	0.1 %	0.1 %	0.1 %